Echoing Success, National CAD CAM Competition 2024 Polman Negeri Babel Officially Closed
The winning participants from various universities gathered at the Polman Babel Hall Building to celebrate the closing of the 2024 National CAD CAM Competition (NCC). This moment was a silent witness to the long journey full of challenges and innovation that they had gone through.
Participants from various universities experienced the moment they had been waiting for at the closing of the 2024 National CAD CAM Competition (NCC). The event which took place at the Polman Babel Hall Building on Wednesday evening (16/10/2024) marked the end of a competition full of challenges and innovation.
In his speech, Deputy Director III Polman Babel, Eko Sulistyo, M.T., conveyed an important message to all participants. “This competition is not only about winning, but also about the experience and learning you get. Don't let the final result disappoint your spirit. "Keep trying and learn from this experience," stressed Eko, giving motivation to those who have not yet won.
The chief executive, Pristiansyah, M.Eng., also expressed his thanks to all participants, supervisors and judges for their contribution to the success of the event.
“We realize that there are still many shortcomings in this implementation. "Please forgive if there are things that are less than satisfactory," he said, hoping that all participants would gain valuable experience.
Participants are eagerly awaiting the results of the judging in the various categories up for grabs, such as CAD 2D Drafting, CAD 3D Modeling, CAD 3D Mechanical Animation, and CADCAM Milling. The enthusiasm of the participants was clearly visible when they showed skill and creativity in each work presented.
List of Champions
2D CAD DRAFTING CATEGORIES:
Intermediate Level:
1st Place Yusuf Aditya Dewantoro (Madiun State Polytechnic)
2nd Place Bagas Adi Saputro (Polman Babel)
3rd place KMS. Muhammad Qhori Ramadhan (Sriwijaya State Polytechnic)
Advanced Level:
1st Place Hermansyah (Semarang State Polytechnic)
2nd Place Dimas Eka Saputra (Surabaya State Shipping Polytechnic)
3rd Place Adrian San Ridha (Bandung State Polytechnic)
Expert Level:
1st Place Muhammad Panca Perwira Perkasa (Sriwijaya State Polytechnic)
2nd Place Muhammad Haikal Gibran (Bandung State Polytechnic)
3rd Place Shaubil Haqqi Mayda Putra (Bandung State Polytechnic)
Master Level:
1st Place Deni (Polman Babel)
2nd Place Muhammad Haniifa Azka At-Taqiy (Bandung State Manufacturing Polytechnic)
3rd Place Gilang Yuka Prahara (Surabaya State Shipping Polytechnic)
3D MODELING CAD CATEGORIES:
Intermediate Level:
1st Place Ananda Jafron Rhionaldo (Padang State University)
2nd Place Muhammad Ilham Andree Pratama (Tidar University)
3rd Place Dioalfas Wijaya (Malang State Polytechnic)
Advanced Level:
1st Place Wawan Gunawan (Jakarta State Polytechnic)
2nd Place Muhammad Aliyuddin Arifa (Bandung State Polytechnic)
3rd Place Adrian Raihan (Polman Babel)
Expert Level:
1st place Mhd. Ahza Zaidan Pramanda (Medan State Polytechnic)
2nd Place Fauzan Dary Wardhany (Polman Babel)
3rd Place Rangga Abieltha (Bandung State Polytechnic)
Master Level:
1st place Amorazi Bimanyu (Polman Babel)
2nd Place Ilham Surya (Lhokseumawe State Polytechnic)
3rd Place Muhammad Deni Amrulloh (Surabaya State Shipping Polytechnic)
3D MECHANICAL ANIMATION CAD CATEGORY:
Intermediate Level:
1st Place Dito Oky Syahrial (Madiun State Polytechnic)
2nd Place Gunawan Jati Pamungkas (Batam State Polytechnic)
3rd Place Muhammad Ridwan Tarmizi (Medan State Polytechnic)
Advanced Level:
1st Place Muhammad Sidik Hidayatullah (Bandung State Manufacturing Polytechnic)
2nd Place Ahmad Said Wijaya (Batam State Polytechnic)
3rd Place Muhammad Fahmi Fadlurrahman (Bandung State Polytechnic)
Expert Level:
1st Place Ammar Ghazwan (Bandung State Polytechnic)
2nd Place: Indomitable Andy Hanggorekso (Indonesian Nuclear Technology Polytechnic)
3rd Place Muhamad Saefullah (Bandung State Polytechnic)
Master Level:
1st Place Reza Aditiya Pratama (Sriwijaya State Polytechnic)
2nd Place Achmad Faisal Aziz (Indonesian Nuclear Technology Polytechnic)
3rd Place Aditya Arwandana (Polman Babel)
CADCAM MILLING CATEGORIES:
Intermediate Level:
1st Place Gilmawan Kusmayadi (Bandung State Polytechnic)
2nd Place Muhammad Iqbal Parezi (Padang State University)
3rd Place Nuke Erlyana Putri (Jakarta State Polytechnic)
Advanced Level:
1st Place Dimas Setiantio Adji (Bandung State Polytechnic)
2nd Place Mochammad Lutfi Herlambang (Surabaya State Shipping Polytechnic)
3rd Place Nur Hadi Hazami (Jakarta State Polytechnic)
Expert Level:
1st Place Rizqy Rohman (Surabaya State Shipping Polytechnic)
2nd Place Dwiky Septian Aditya (Semarang State Polytechnic)
3rd Place Khoirul Amin (Surabaya State Shipping Polytechnic)
Master Level:
1st Place Deri Indrawan (Bandung State Manufacturing Polytechnic)
2nd Place Dimas Sandi Wiranata (Sriwijaya State Polytechnic)
3rd Place Muhammad Elman Daraini (Sriwijaya State Polytechnic)
With the end of NCC 2024, hopefully the enthusiasm and innovation of participants can continue to burn in the future.
